+91 80 41492844

info@excelcraft.in

Wire Drawing Machines Video

Specifications:

TECHNICAL DATA

Spool Size-mm

630

Design

(1+6 ) , ( 1+12), (1+18), (1+24), (1+32) cage configurations

Speed

170~300 rpm

Wire range

1.5mm ~5 mm Al, Alalloy, copper

Application

ACSR, AAC, Copper conductor...

LATEST DEVELOPED MAIN FEATURES OF THE MACHINE:

  • All Cages, Pre-Spiraling Heads, Taping Head, Capstan & Takeup are separately driven.
  • All cages can be loaded simultaneously, thereby reducing loading time to Max. 30 minutes. 
  • Latest Electronics (Simotion control) employed to obtain accurate synchronization of entire line.
  • Lay is fed in MMI (Operator touch screen) instead of Gearbox. Any lay value in the range can be
    set & achieved.
  • In Power failure situation, the machine comes to a controlled stop, enabling the Product safety
  • The cage is completely welded rigid construction. In-house manufactured and machined.
  • The cage is driven through Timer Pulley & belts during normal run. Separate Gearbox is used during Loading operation.
  • Bobbin is held by spring pressure with a secondary positive lock. The release of bobbin is by externally plugged pneumatic compressed Air( Max 6 Bar only). The cylinders designed for operating with lesser than 6 Bar pressure.
  • Constant Bobbin back tension achieved by Electro pneumatic valve & Single bobbin rotation is electronically sensed for controlling the required tension.
  • Loading / Unloading by Hydraulic loader provided to the side of the cage placed on ground.